Collect urine samples in clean, dry containers, either plastic or glass, without any preservatives. Urine specimens may be refrigerate (2-80C) and stored up to forty-eight hours. For longer storage, freeze samples (-200C or below). Bring frozen or refrigerated samples to room temperature before testing.
Urine samples exhibiting visible precipitates should be filtered, centrifuged or allowed to settle. Use only clear aliquots for testing.
Review Specimen collection instructions. Test device, patients samples, and controls should be brought to room temperature (20-30) prior to testing. Do not open pouches until ready to perform the assay.
Remove the test strip from its protective pouch (bring the device to room temperature before opening the pouch to avoid condensation of moisture on the membrane). Label the device with patient or control number.
Fill a test tube or urine cup with sample. Holding the strip vertically, place it into the sample container. the urine level should not be higher than the mix level indicator line on the strip.Do not cover the urine over the max (maximum) line. You may leave the strip in the urine or you may take the strip out after a minimum of 15 seconds in the urine and lay the strip flatly on a non-absorptive clean surface.)and then start the timer. Use a separate pipette and device for each sample or control.
Read result between 3 to 8 minutes after the addition of samples. Do not read result after 8 minutes.
Fast to test and easy to read
Read results within 5 minutes
High sensitivity and high quality
Q1: What's the method u use to do the test?
A: Colloidal Gold Method.
Q2: What's ur MOQ ?
A: Always, for strip format, the MOQ is 5000pcs. While for cassette format, MOQ is 2000pcs, same as midstream.
Q3: What's ur packing of the tests?
A: If u choose the low cost, we will suggest u the bulk packing to go. Which means 1 test in a single pouch, then 100/40 pouches in a plastic bag, 50 bags in a carton. If u need to sell in
pharmacy/chain shop or some countries which have strict requirements about the packing, u can choose to pack in a box, like 100pcs in a box, or even 1 test in a single box.
Q4: What's the main differences when comparing products from different suppliers?
A: U can compare the mainly features of the test: Accuracy, Sensitivity, Specificity, and then the Price.
Q5: Some tests can be tested with serum/plasma or with whole blood, so what's the difference?
A: Well, if the specimen is whole blood, people will need buffer, lancet and alcohol swab to help the test. If they buy all the accessories, they can test very easily at home. But if the specimen
is serum/plasma, it will need centrifuge to separate serum from whole blood first. This way, it's better to use at lab or hospital. And in some words, serum/plasma test will always give a more
Q6: How can i distinguish a good test kit?
A: U can judge from the 4facts:Technical data: Such as the accuracy, specificity and sensitivity